Hyundai Tucson: Tires and wheels / Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.
All specifications (sizes and pressures) can be found on a label attached to the driver’s side center pillar
Tires and wheels
WARNING
Tire failure may cause loss of vehicle control resulting in an accident. To
reduce risk of SERIOUS INJURY or DEATH, take the following precautions:
Inspect your tires monthly for proper ...
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are
cold. “Cold tires” means the vehicle has not been driven for at least three hours
or driven less than one mile (1. ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Injector Troubleshooting
Signal Waveform
The three waveforms below are taken from the #1 and #4
injectors. The top waveform is from the high side (feed side) of the #1
and #4 injectors, while the middle waveform is from the low side (ground
side) of the #1 injector and the bottom waveform is from the low side
of ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Ambient Sensor Description and Operation
Description
1.
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor; resistance will increase with lower temperature, and
decrease with higher temperatures.
2.
The sensor output will be used for di ...
