Hyundai Tucson: Propeller Shaft Assembly / Propeller Shaft Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Driveshaft and axle / Propeller Shaft Assembly / Propeller Shaft Repair procedures

Removal

After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A).

Tightening torque:

49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.1 ~ 50.6 lb-ft)

Remove the center bearing bracket (A) mounting bolts (B-2ea).

Tightening torque:

49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.1 ~ 50.6 lb-ft)

After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A).

Tightening torque:

49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.1 ~ 50.6 lb-ft)

Do not reuse bolts.

Install in the reverse order of removal.

•	When assembling propeller shaft, locate marks on flange yoke and T/M transfer flange to be nearly the same loacation.

Propeller Shaft Components and Components Location

Components 1. Front propeller shaft2. Center bearing bracket3. Rear propeller shaft ...

Differential Carrier Assembly

...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Compressor Oil Repair procedures
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the model of compress ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Manual heating and air conditioning
The heating and cooling system can be controlled manually by pushing buttons or turning knob(s) other than the AUTO button. In this case, the system works sequentially according to the order of buttons or knob(s) selected. ✽ NOTICE When pressing any button (or turning any knob) except the AU ...