Hyundai Tucson: General Information / Description and Operation

Description
Emissions Control System consists of three major systems.
The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
The Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
The Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.
General Information
...

Specifications
Specifications Purge Control Solenoid Valve (PCSV) x Specification ItemSpecificationCoil Resistance (x)22.0 ~ 26.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) x Type: Piezo-Resistive ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Fuel Pressure Control Valve Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2. 4. Check that the resistance is within the specifica ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Brake Pedal Components and Components Location
Components 1. Cowl bracket2. Brake pedal member assembly3. Stop lamp switch4. Return spring5. Brake pedal stopper6. Clevis pin7. Snap pin8. Brake pedal ...

© 2010-2024 www.htmanual.net