Hyundai Tucson: Engine Control System / Crankshaft Position Sensor (CKPS) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) Description and Operation

Description

Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing.

This sensor is installed in ladder frame and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when the engine rotates. The target wheel consists of 58 slots and 2 missing slots on 360 CA (Crank Angle).

Engine Coolant Temperature Sensor (ECTS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECT ...

Crankshaft Position Sensor (CKPS) Specifications

Specification ItemSpecificationCoil Resistance (x)774 ~ 946 [20°C (68°F)] ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Anchor Pretensioner Description and Operation
Description Anchor pretensioner operates as well as belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it is an equipment to make up for the existing short stroke. Anchor pretensioner is supported by tw ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Water pump Components and Components Location
Components 1. Water pump pulley2. Water pump3. Water pump gasket4. Water inlet fitting5. Thermostat6. Water temperature control assembly7. Engine coolant temperature sensor8. Bypass hose9. Heater pipe & hose assembly10. Throttle body coolant hose ...