Hyundai Tucson: Air Conditioning System / A/C Pressure Transducer Description and Operation

Description
A/C pressure transducer convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operating it high speed or low speed. Engine ECU stop the operation of compressor when the temperature of refrigerant line is so high or so low irregularly to optimize air conditioning system.
A/C Pressure Transducer Components and Components Location
Component Location ...

A/C Pressure Transducer Repair procedures
Inspection 1. Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals. 2. Inspect the voltage value whether it is sufficient to be regular value ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer to “Specification” Removal 1. Turn the ignition switch OFF and disconnect the negative ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Panoramaroof Repair procedures
Replacement Glass Replacement 1. Open the glass. 2. Loosen the mounting screw (A). 3. After loosening the mounting screws, then remove the glass (A).     • Do not damage the screw. 4. Install in the reverse order of removal. Motor Replacement 1. Remo ...

© 2010-2024 www.htmanual.net