Hyundai Tucson: Intake And Exhaust System / Intake Manifold Components and Components Location
| Components |
| 1. Intake manifold assembly 2. Intake manifold gasket | 3. Electronic throttle body 4. Electronic throttle body gasket 5. Intake manifold stay |
Intake Manifold Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
3.
Disconnect t ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Steering Angle Sensor Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in EPS (Electric
Power Steering) and it sends messages to HECU through CAN communication
line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses the signals from the SAS when performing ESP- ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Hazard Lamp Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the hazard lamp switch assembly.
(Refer to the BE group - "Audio head unit")
3.
Disconnect the hazard lamp switch connector (A).
4.
If the hazard lamp switch is not as specified, replace it carefully and take care n ...
