Hyundai Tucson: Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Description and Operation

Description

Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter.

Output Speed Sensor Repair procedures

Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal 1. Remove the valve body assembly. (R ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Specifications Direct control VFS[T/CON] x Control type : Normal low type Control Pressure kpa (kgf/cmx, psi)9.81 ~ 500.14(0.1 ~ 5.1,1.42 ~ 72.54)Current value(mA)50 ~ 850 Internal resist ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Brake Pedal Repair procedures
Removal 1. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 2. Pull down steering column shaft after removing bolts and nuts. 3. Disconnect the stop lamp switch connector (A). 4. Remove the brake pedal member mounting nuts (B). Tightening torque: 16.7 ~ 25.5 N.m ( ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway. To turn the hazard warni ...