Hyundai Tucson: General Information / Specifications
| Specification |
| Item | Resistance (x) |
| Driver Airbag (DAB) | 1.5 ~ 6.0 |
| Passenger Airbag (PAB) | 1.5 ~ 6.0 |
| Side Airbag (SAB) | 1.5 ~ 6.0 |
| Curtain Airbag (CAB) | 1.5 ~ 6.0 |
| Seat Belt Pretensioner (BPT) | 1.5 ~ 6.0 |
| Anchor Pretensioner (APT) | 1.5 ~ 6.0 |
Tightening Torques
| Item | N.m | kgf.m | lb-ft |
| Driver Airbag (DAB) | 7.8 ~ 10.8 | 0.8 ~ 1.1 | 5.8 ~ 8.0 |
| Passenger Airbag (PAB) | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 |
| Curtain Airbag (CAB) | 7.0 ~ 9.0 | 0.7 ~ 0.9 | 5.1 ~ 6.6 |
| Seat Belt Anchor Bolt | 39.2 ~ 53.9 | 4.0 ~5.5 | 28.9 ~ 39.8 |
| SRSCM | 6.8 ~ 9.2 | 0.7 ~ 0.9 | 5.0 ~ 6.8 |
| Front Impact Sensor (FIS) Mounting Bolt | 7.0 ~ 9.0 | 0.7 ~ 0.9 | 5.1 ~ 6.6 |
| Pressure Side Impact Sensor (PSIS) Mounting Screw | 1.1 ~1.3 | 0.11 ~1.3 | 0.7 ~ 1.0 |
| Side Impact Sensor (SIS) Mounting Bolt | 7.0 ~ 9.0 | 0.7 ~ 0.9 | 5.1 ~ 6.6 |
General Information
General Information
The supplemental restraint system (SRS) is designed to
supplement the seat belt to help reduce the risk or severity of injury
to the driver and passenger by activating and d ...
Special Service Tools
Special Service Tools
Tool(Number and Name)IllustrationUseDeployment tool0957A-34100AAirbag deployment tool.Deployment adapter0957A-3Q100Use with deployment tool.(PAB, CAB, APT)Deployment adapter ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Start/Stop Button Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the left air vent.
(Refer to the BD group - "Crash pad")
3.
Disconnect the connector (A).
[LHD]
[RHD]
4.
Remove the start/stop button (A) after loosening the mounting screws.
[LHD]
[RHD]
Installation
1.
Ins ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Output Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed sensor conn ...
© 2010-2024 www.htmanual.net
