Hyundai Tucson: Smart Parking Assist System (SPAS) / Specifications
| Specifications |
| SPAS unit | Power | IGN 1 |
| Operating voltage | 9V ~ 16V | |
| SPAS sensor (Front/Rear) | Number of sensors | 4EA (Front), 4EA (Rear) |
| Operation voltage | 9V ~ 16V | |
| Supply current | 0.5mA ~ 5mA | |
| Operation frequency | 51.2 Khz | |
| Detecting range | 2m | |
| Detection angle(horizontal) | 75° | |
| Detection angle(Vertical) | 75° | |
| SPAS sensor (Side) | Number of sensors | 2EA (Front left, Front right) |
| Operation voltage | 9V ~ 16V | |
| Supply current | 0.5mA ~ 5mA | |
| Operation frequency | 51.2 Khz | |
| Detecting range | 4m | |
| Detection angle(horizontal) | 45° | |
| Detection angle(Vertical) | 45° | |
| Speaker | Internal resistance | 50x ± 15% |
| Power consumption | MAX. 0.5 Watt | |
| Frequency | 800hz ~ 1500hz |
Components and Components Location
Component Location
ItemDescriptionSPASSPAS unit(ECU)• Calculate the parking trace of wheels • Calculate and ask the demand angle to MDPS• Warning and detection logic of the front/rear objec ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Lower Anchors and Tether for Children (LATCH) System
The LATCH system holds a child restraint during driving and in an accident.
This system is designed to make installation of the child restraint easier and
reduce the possibility of improperly installing your child restraint. The LATCH
system uses anchors in the vehicle and attachments on the ch ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Battery Sensor Repair procedures
Removal
1.
Disconnect the battery negative (-) cable.
2.
Disconnect the battery sensor connector (A).
3.
Remove the battery negative (-) cable after removing the bolt (B).
Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation bolt:
21.6 ~ 32 ...
