Hyundai Tucson: Ignition System / Spark Plug Specifications

Specification
Item
Specification
Type
SILZKR7B11
Gap
1.0 ~ 1.1
(0.0394 ~ 0.0433)

Spark Plug Description and Operation
Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture there ...

Spark Plug Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Description and Operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the cylinder block is applied as pressure to the piez ...

Hyundai Tucson (LM) 2010-2015 Service Manual: External Amplifier Repair procedures
Removal External Amplifier 1. Remove the rear right luggage side trim. (Refer to Body - "Interior Trim") 2. Remove the external amplifier (B) after disconnecting the connectors (A) and loosening the mounting nuts. Installation External Amplifier 1. Install the external amplifier afte ...

В© 2010-2025 www.htmanual.net