Specifications |
Item | Specification |
Ultrasonic sensor | Voltage rating | DC 12 V |
Detecting range | 15.7 ~ 47.2 in (400 ~ 1200 mm) |
Operation voltage | DC 9 ~ 16 V |
Operation current | MAX 300 mA |
Operation temperature | -22°F ~ + 176°F (-30°C ~ + 80°C) |
Beam width | Horizontal : 100±5°(70cm), Vertical : 60±5°(50cm) |
Number of sensors | 4 (Right, Center-left, Center-right, Left) |
Piezo buzzer | Voltage rating | DC 12 V |
Operation voltage | DC 9 ~ 16 V |
Operation temperature | -22°F ~ + 176°F (-30°C ~ + 80°C) |
Operation current | MAX 60 mA |
Sound, tone | Oscillation frequency : 2.2±0.5 KHz |
Sound level : MIN 70 dB (DC 13V /m) |
Hyundai Tucson (LM) 2010-2015 Service Manual: Ultrasonic Sensor Repair procedures
Removal
1.
Remove the rear bumper.
(Refer to the BD group - "Rear bumper")
2.
Disconnect the sensor connector (A) inside the rear bumper.
3.
Pull out the sensor (A) by opening the sensor holder (B) out.
Installation
1.
Connect the connector, and then reassemble the sensor.
2.
I ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Fluid Repair procedures
Service Adjustment Procedure
Oil level Check
A check of ATF level is not normally required during
scheduled services. If an oil leak is found, perform the oil level check
procedure after repairs are completed.
When checking the oil level, be ...