Hyundai Tucson: Manual Transaxle Control System / Control Shaft Assembly Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Shaft Assembly Description and Operation

Description

Control shaft assembly is mounted on the top of the manual transmission, and select & shift cable are equipped.

Control shaft assembly is operated by shifting the shift lever.

Control Cable Repair procedures

Inspection 1. Check the select cable for proper operation and for damage. 2. Check the shift cable for proper operation and for damage. 3. Check the boots for damage. 4. Check the bo ...

Control Shaft Assembly Repair procedures

Removal 1. Remove the following items; A. Air cleaner assembly and air duct. (Refer to "Intake and Exhaust system" in EM group.) B. Battery and battery tray. (Refer to "Charging system" i ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: TPMS Sensor Repair procedures
Removal Tire Removal 1. Deflate tire & remove balance weights. Sensor can be unscrewed before unseating the tire bead. • The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Master Cylinder Repair procedures
Removal Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water. 1. Disconnect the push rod from the clutch pedal by removing the snap pin (A) and washer (B). 2. Disconnect the ...