Hyundai Tucson: 4 Wheel Drive (4WD) System / 4WD Control System
- Repair procedures
- 4WD ECU Components and Components Location
- 4WD ECU Description and Operation
- 4WD ECU Flow Diagram
- 4WD ECU Schematic Diagrams
- 4WD ECU Repair procedures
Oil Seal Repair procedures
Replacement
[Right side]
1.
Remove the driveshaft assembly. (RH side)
(Refer to Driveshaft and axle - "Front Driveshaft ")
2.
Remove the dust cover (A).
3.
Remove the oil seal (A, B).
...
Repair procedures
Adjustment
Description
The friction material inside the coupling will degrade over
time. Therefore, corresponding compensation values must be referenced
and entered after replacing the contr ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Ambient Sensor Description and Operation
Description
1.
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor; resistance will increase with lower temperature, and
decrease with higher temperatures.
2.
The sensor output will be used for di ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Securing a child restraint with the LATCH anchors system
To install a LATCH-compatible child restraint in either of the rear outboard
seating positions:
1. Move the seat belt buckle away from the lower anchors.
2. Move any other objects away from the anchors that could prevent a secure connection
between the child restraint and the lower anchors.
3 ...
