Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly.
(Refer to the BD group - "Roof trim") |
3. |
Check for continuity between the terminals. If the continuity is not as specified, replace the sunroof switch. |
Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Description
Automatic Transaxle System relies on various measurement data
to determine the current control status and extrapolate the necessary
compensation values. These values are used to control the actuators and
achieve the desired control output.
If a problem with ...
Hyundai Tucson (LM) 2010-2015 Service Manual: ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection
Rear Wiper Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.11 in the A and
No.12 in the A terminals when power and ground are connected to the No.2
in the A and No.11 in the A terminals.
2.
There should be no continuity between ...