Hyundai Tucson: Automatic Transaxle Control System / Inhibitor Switch Specifications
| Specifications |
| Power supply (V) | 12 |
| Output type | Pin to Pin |
| P | P-R | R | R-N | N | N-D | D | |
| S1 | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| S2 | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| S3 | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| S4 | 0 | 0 | 0 | 0 | 0 | 12V | 12V |
Inhibitor Switch Description and Operation
Description
Inhibiter Switch contains two contact points. One of these
points connects the engine startup when the lever is in the N or P
position and turns on the reverse lights. The other con ...
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Cluster Ion Generator Repair procedures
Inspection
1.
Press the OFF switch more then 4 times within 2 seconds while pressing the MODE switch.
DisplayFail description00Normal50Cluster ion generator fault
* Diagnostic procedure refer to DTC code.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Valve Body Components and Components Location
Components Location
1. PCV adjust screw2. Solenoid valve3. Oil temperature sensor4. Accumulator5. Under drive brake (UD/B) pressure flow hole6. Low & reverse brake (LR/B) pressure flow hole
Valve Body Flow
1. To cooler2. From cooler3. Lubrication(rear)4. Overdrive pressure5. Reducing ...
