Hyundai Tucson: Engine Control System / Fuel Tank Pressure Sensor (FTPS) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS) Description and Operation

Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solenoid valve operation and detects a leakage of the system.

Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer t ...

Fuel Tank Pressure Sensor (FTPS) Specifications
Specification Pressure [kPa (kgf/cmx, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5 ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Starter Relay Repair procedures
Inspection 1. Disconnect the battery negative terminal. 2. Remove the fuse box cover. 3. Remove the starter relay (A). 4. Using an ohmmeter, check that there is continuity between each terminal. TerminalValueMeasure30 - 871Mx or HigherIf there is continuity, replace the relay. ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Filler-Neck Assembly Repair procedures
Removal 1. Remove the rear-LH wheel, tire, and the inner wheel house. 2. Disconnect the fuel filler hose (A) and the ventilation hose (B). 3. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A). 4. Remove the filler-neck assembly from the vehicle after ...

© 2010-2024 www.htmanual.net