Hyundai Tucson: Exterior care / Bright-metal maintenance
Hyundai Tucson (LM) 2010-2015 Owners Manual / Maintenance / Appearance care / Exterior care / Bright-metal maintenance
- To remove road tar and insects, use a tar remover, not a scraper or other sharp object.
- To protect the surfaces of brightmetal parts from corrosion, apply a coating of wax or chrome preservative and rub to a high luster.
- During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound.
Finish damage repair
Deep scratches or stone chips in the painted surface must be repaired promptly.
Exposed metal will quickly rust and may develop into a major repair expense.
✽ NOTICE
If your vehicle is damaged a ...
Underbody maintenance
Corrosive materials used for ice and snow removal and dust control may collect
on the underbody. If these materials are not removed, accelerated rusting can occur
on underbody parts such as the fu ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: AWD LOCK indicator (if equipped)
The AWD LOCK indicator light is illuminated when the AWD LOCK button is pushed.
The purpose of this AWD LOCK mode is to increase the drive power when driving on
wet pavement, snow-covered roads and/or off-road.The AWD LOCK indicator light is
turned off by pushing the button again.
CAUTION
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Specifications
Specifications
SPAS unitPowerIGN 1Operating voltage9V ~ 16VSPAS sensor (Front/Rear)Number of sensors4EA (Front), 4EA (Rear)Operation voltage 9V ~ 16VSupply current 0.5mA ~ 5mAOperation frequency 51.2 KhzDetecting range 2mDetection angle(horizontal) 75°Detection angle(V ...
© 2010-2024 www.htmanual.net
